Compteurs d’électricité

CSM 0201

Single-phase electronic meter

The CSM 0201 meter belongs to the category of measuring apparatus and it is intended for the metering of active electrical energy for residential consumers, and commercial agents which use tariff systems with one tariff for the electrical energybilling in single-phase low voltage networks.

TECHNICAL CHARACTERISTICS:

– Rated voltage, Un:                    230 V
– Base current, Ib:                       5 A
– Maximum current, Imax:       80 A
– Minimum current, Imin:        0,25 A
– Rated frequency, fn:                50 Hz sau 60 Hz
– Frequency range:                     45…65 Hz
– Meter constant (imp/kWh):  1000 imp/kWh

CST 0420

Three-phase electronic meter

The meter can be customised, i.e. specific parameters can be set with software according to the specific requirements of each customer. The parameters can be set during manufacturing or later by parametrization software through the optical port or remotely through the AMR module. The parameters stored in the meter are protected against unauthorized overwriting. The base meter measures active and reactive energy consumption in all 3- and 4-wire networks. It is direct connected for 1, 2 or 3 phase measurement. The functionality of this meter is suitable for smaller consumers, i.e. for households and small industries. There are tariff registers for active energy. The meter is equipped with a clear LCD display for multi utility purpose. An optical interface for local connection and an interface for the AMR module are available.

TECHNICAL CHARACTERISTICS

General
– 1, 2 or 3 phase measurement in 3 or 4 wire networks.

Single-phase electronic electricity meters:

ENERLUX P

These are electronic meters with LCD display, two tarrifs, with or without optical port and communication possibilities. Enerlux meters belong to the category of measuring means and they are intended for the metering of active electrical energy for residential consumers, and commercial agents.

ENERLUX M
ENERLUX M are meters of the last generation, based on leading edge technologies in the field. This type of meters are with 4 tariffs. They are also multifunctional, with maximum overload 1600%, class 1 (EN 62053-21) and have communication possibilities (EN 62056-21).

ELERLUX M WITH PLC

ENERLUX M are meters of the last generation, based on leading edge technologies in the field. This type of meters are with 4 tariffs. They are also multifunctional, with maximum overload 1600%, class 1 (EN 62053-21) and have communication possibilities (EN 62056-21).

ENERLUX M WITH  PLC TURTLE

ENERLUX M are meters of the last generation, based on leading edge technologies in the field. This type of meters are with 4 tariffs. They are also multifunctional, with maximum overload 1600%, class 1 (EN 62053-21) and have communication possibilities (EN 62056-21).

CSM 0201

The CSM 0201 meter belongs to the category of measuring apparatus and it is intended for the metering of active electrical energy for residential consumers, and commercial agents which use tariff systems with one tariff for the electrical energy billing in single-phase low voltage networks.

CSM 0202

The CSM 0202 meter belong to the category of measuring and it is intended for the metering of active electricals apparatus energy for residential consumers, and commercial agents which use tariff systems with one tariff for the billing of the electrical energy in single phase low voltage networks.

Three-phase electronic electricity meters:

CST 0410 CDSNR

CST 0410 meters belong to the category of the work measuring means and are meant for active and reactive electric energy metering for residential consumers and commercial and industrial agents that use multi-tariff systems for electric energy billing on low, medium and high voltage networks.

CST 0410 CDM WITH MODEM

CST 0410 meters belong to the category of the work measuring means and are meant for active and reactive electric energy metering for residential consumers and commercial and industrial agents that use multi-tariff systems for electric energy billing on low, medium and high voltage networks.

CST 0410L DG
CST 0410 meters belong to the category of the work measuring means and are meant for active and reactive electric energy metering for residential consumers and commercial and industrial agents that use multi-tariff systems for electric energy billing on low, medium and high voltage networks.

CST 0410 CDSGMR
CST 0410 meters belong to the category of the work measuring means and are meant for active and reactive electric energy metering for residential consumers and commercial and industrial agents that use multi-tariff systems for electric energy billing on low, medium and high voltage networks.

CST 0410L D

CST 0410 meters belong to the category of the work measuring means and are meant for active and reactive electric energy metering for residential consumers and commercial and industrial agents that use multi-tariff systems for electric energy billing on low, medium and high voltage networks.

Ehz e3L

The electronic residential meter eHZ E3L-AW11xx2 is an electricity meter for measuring active energy in a single or two-tariff designs for billing purposes according to FNN Lastenheft eHZ version 2.1 and Lastenheft EDL version 1.1. For two or four wire networks a plug-in system (BKE) is used.

ENERLUX TLS

ENERLUX TLS meters belong to the category of operating measuring means intended for metering the active and
reactive electric energy for residential and commercial consumers that use AMR systems with PLC communication in low voltage three-phase networks.

HZ E3L

The electronic residential meter eHZ E3L-AW11xx2 is an electricity meter for measuring active energy in a single or two-tariff designs for billing purposes according to FNN Lastenheft eHZ version 2.1 and Lastenheft EDL version 1.1. For two or four wire networks a plug-in system (BKE) is used.

CST 0420

The base meter measures active and reactive energy consumption in all 3- and 4-wire networks. It is direct
connected for 1, 2 or 3 phase measurement. The functionality of this meter is suitable for smaller consumers, i.e. for households and small industries.

CST 0420 WITH PLC

The base meter measures active and reactive energy consumption in all 3- and 4-wire networks. It is direct
connected for 1, 2 or 3 phase measurement. The functionality of this meter is suitable for smaller consumers, i.e. for households and small industries.